Products: Display Controllers

FAQ

S1D13A05

Q01. Please provide more information on the termination of the unused pins of S1D13A05 in case of using under CPU interface mode Generic #2.
Q02. Is it possible to connect the product to the Renesas SH-2?
Q03. Is it possible to use the product with the LCD panel rotated?
Q04. When using a single CPU read signal in Generic #1, which should I connect it to – RD# or RD/WR#?
Q05. Can you provide an instruction manual on USB?
Q06. Do you offer an IBIS model?
Q07. Do you offer related software or device drivers?
Q08. Do you offer an evaluation board?
Q09. Please provide a contact address in the event of cases in which the product fails to operate normally.
Q10. How much power does this device consume?

Q01. Please provide more information on the termination of the unused pins of S1D13A05 in case of using under CPU interface mode Generic #2.

A．Leave any unused output pin, DRDY, PWMOUT, IRQ, GPO[10:0] or USBOSCO, not connected.
Terminate the unused input pins as indicated in the spec. If there is no indication in the spec, terminate the pins as shown below.

WAIT#	Pull down or pull high by 1kΩ
CLKI2	Pull down by 1kΩ
GPIO0 to GPIO7	Pull down by 1kΩ

Page top

Q02. Is it possible to connect the product to the Renesas SH-2?

A．S1D13A05 and SH-2 can be connected directly via the bus.
The technical manual treats the interface with SH-2 as Generic #1. It does not describe the SH-2 interface.
Here, connect the BS# signal to IOVDD.

Page top

Q03. Is it possible to use the product with the LCD panel rotated?

A．The SwivelView function provides a rotated view.
It supports views rotated by 90 degrees, 180 degrees, and 270 degrees.

Page top

Q04. When using a single CPU read signal in Generic #1, which should I connect it to – RD# or RD/WR#?

A．Connect to both RD# and RD/WR#.
All read operations will be 16-bit only. 8-bit read operations will not be supported.

Page top

Q05. Can you provide an instruction manual on USB?

A．Refer to the attached documents.

USBFC (USB Function Controller) EIFUFAL501 user's manual

Page top

Q06. Do you offer an IBIS model?

A．Refer to the attached documents.

S1D13A05 IBIS model

Page top

Q07. Do you offer related software or device drivers?

A．Related software and device drivers are available at the URL below. http://vdc.epson.com/index.php?option=com_docman&task=cat_view&gid=164&Itemid=40

Page top

Q08. Do you offer an evaluation board?

A．We provide the S1D13A05 evaluation board (S5U13A05P00C100).
Please contact a Seiko Epson sales representative.

Page top

Q09. Please provide a contact address in the event of cases in which the product fails to operate normally.

A．Please contact a Seiko Epson sales representative.

Q10. How much power does this device consume?

A．Power consumption varies with operating conditions. Refer to the reference material provided as follows, which shows power consumption figures under typical operating conditions.
http://vdc.epson.com/index.php?option=com_docman&task=cat_view&gid=224&Itemid=40

Page top