Products: Display Controllers
FAQ
S1D13742
- Q01. How do I treat the CS# signal in burst mode?
- Q02. Is block write possible in burst mode?
- Q03. Please provide the timings for writing the displayed data in the buffer.
- Q04. Please provide the setting example for switching the full screen display using the double buffer.
- Q05. Please provide the setting example for switching the overlay display using the double buffer.
- Q06. Please provide the setting example for changing the overlay display range every time.
- Q07. How can I obtain a datasheet?
- Q08. Do you offer an IBIS model?
- Q09. Do you offer related software or device drivers?
- Q10. Do you offer an evaluation board?
- Q11. Please provide a contact address in the event of cases in which the product fails to operate normally.
A．In burst mode, the automatic address increment in effect is independent of whether the CS# is set to H each time or kept to L.
A．Block writes are possible since the data in the area set at the start/end positions are updated.
A．Update the data only when the panel is not displayed.
When REG[58h]bit[2:0]=110, the undisplayed period is indicated when the TE signal is L.
A．
- Double buffer ON (REG[36h]bit7=1).
- Set the start/end positions (REG[38h]-REG[46h]) to full screen.
- Write the same background data to Buffer 1 and Buffer 2.
- Full screen display (REG[36h]bit6=1) with the double buffer.
A．
- Double buffer ON (REG[36h]bit7=1)
- Set the start/end positions (REG[38h]-REG[46h]) to full screen.
- Write the same background data to Buffer 1 and Buffer 2.
- Set the start/end positions (REG[38h]-REG[46h]) to the overlay area.
- Alternately write the images to Buffer 1 and Buffer 2.
- Full screen display (REG[36h]bit6=1) with double buffer.
A．
- Set the start/end positions (REG[38h]-REG[46h]) to full screen.
- Write the background data to the buffer.
- Set the start/end positions (REG[38h]-REG[46h]) to the overlay area.
- Write the overlay image to the buffer.
- Set the start/end positions (REG[38h]-REG[46h]) to the overlay area.
- Write the background data to the buffer.
- Set the start/end positions (REG[38h]-REG[46h]) to the overlay area to be modified.
- Write the overlay image to the buffer.
Repeat 5) to 8).
A．Data sheet is available at the URL below.
http://vdc.epson.com/index.php?option=com_docman&task=cat_view&gid=192&Itemid=99
A．Refer to the attached documents.
A．Related software and device drivers are available at the URL below. http://vdc.epson.com/index.php?option=com_docman&task=cat_view&gid=149&Itemid=99
A．We provide the S1D13742 evaluation board (S5U13742P00C100). Please contact a Seiko Epson sales representative.
A．Please contact a Seiko Epson sales representative.
Copyright © SEIKO EPSON CORP. 2012